3" ASB Profile Corrugated PVC Sheets 1.3mm Thick
Corrugated PVC Sheets are the ideal choice for replacing or installing on a newly constructed carport, canopy or covered walkways. They provide a low cost option of coverage for most roofing applications. Sheets are available in a large variety of lengths.
Corrugated PVC Sheets are a low weight, strong and durable product with an attractive appearance at a low cost.
Sheets are 762mm Wide with a cover width of 648mm
Please note these sheets are wider than the sheets sold by some well known DIY stores!
Features include:
UV Resistant
Weather Resistant
Good Impact Strength (which reduces with age)
Recommended support centres are as follows:
0.8mm Thick - 610mm Centres
1.1mm Thick - 762mm Centres
1.3mm Thick - 914mm Centres
3" Corrugated PVC Roofing Sheets - ASB Profile - Technical & Fitting Guide
Fitting Corrugated PVC Roofing Sheets:
Recommended support centres are as follows:
0.8mm Thick - 610mm Centres
1.1mm Thick - 762mm Centres
1.3mm Thick - 914mm Centres
Structure
Sheets must be fixed to supports spaced at centres not exceeding those given above. Paints and wood preservatives applied to the supports must be thoroughly dried prior to fixing the sheets to prevent these attacking the sheet. Surfaces of supports imediately beneath the sheets should be light in colour - preferably white. A minimum pitch of 5 degrees is essential to ensure water run off, it is preferable to have a pitch of 10 degrees or more.
Cutting
Our corrugated PVC Roofing Sheets are supplied in a variety of different standard lengths. Should sheets need to be cut this should be done prior to fitting. Sheets should be approximately 60mm longer than rafter length providing an overhang at the bottom of the slope. When cutting sheets use a fine tooth hand saw at a shallow angle using only light pressure. Support the sheet to minimise vibrations and avoid cracking. In cold weather leave sheets in a warm room for several hours before attempting to cut as warm sheets will be less prone to damage when cutting an/or drilling.
Drilling
Holes for fixing must be pre-drilled. Drill sheets singly using a masonary drill bit using light pressure and low drill speeds. Support the sheet securely beneath each hole position when drilling.
Fixing
Start fixing sheets at the end of the structure which is downward of the prevailing wind. When joining sheets end to end ensure there is an overlap of at least 150mm; when the slope is less than 10 degrees the lap should be increased to 300mm. Foam eaves fillers should be used underneath the sheet at all support positions to prevent 'roof chatter' and to offer support to the sheets. Use corruagted roof sheet fixings with caps and washers to secure the sheet. Ensure the screw is sufficiently tight when the washer under it's head can just be rotated using your thumb and finger.
Cleaning
Sheets should be cleaned using warm soapy water and a sof cloth or sponge. No chemicals should be used to clean the sheets as this may result in damged.
Deliveries are made from ourselves, royal mail and our carefully chosen carriers (TNT etc).
Examples of our delivery pricing are as follows:
Small Items (fixings, eaves fillers, cable ties, insulation etc) - From Free Of Charge
Medium Sized Items (door panels, cylinder locks, greenhouse polycarbonate etc) - From Free Of Charge
Large Items (polycarbonate sheet, corrugated roofing, glazing bars, canopies etc) From £25.00
Smaller items (such as fixings / tapes etc if ordered individually) are usually posted out via royal mail first or second class post. Orders for smaller items are often dispatched same working day if ordered before 1:00pm. All of our smaller items are delivered free of charge with an option to upgrade to Royal Mail 1st Class from £3.99.
Medium sized items and small items with a high value are delivered via a courier service such as Yodel, APC etc. Items are dispatched same working day if ordered before 1:00pm on an express service. Most items are delivered next working day. Tracking information is available for these services. This option is free of charge on most medium or high value small items.
Deliveries of large items (polycarbonate / glazing bars etc) are made via specialist transport services or carriers such as specialist transport companies, TNT, Tuffnells etc. Deliveries are dispatched within one working day and delivery is generally made within 5 - 10 working days, however dependant upon location deliveries may sometimes take longer. We will contact you shortly after you have placed your order to let you know when your order can be delivered. This option is standard on all orders for large items and is charged at £25.00 irrelavent of the quantity or size of product ordered. Please be aware our standard delivery time of 'up to 3 - 10 working days' is an estimate and deliveries may take slightly longer dependant upon location and size of items ordered. PLEASE NOTE OUR CV19 LEAD TIME ADVICE.
Important: Deliveries of our large items (polycarbonate, canopies, corrugated sheet etc) are made on vehicles of up to 18 tonnes in size (which as a guide, is a little larger than the average bin lorry). If you should have ANY delivery restrictions such as weight, height or width or if you live in a rural location with a single track road or a road with tight turns PLEASE INFORM US AT THE POINT OF PLACING YOUR ORDER. We can then try to allocate a smaller vehicle to your delivery.
DO NOT BOOK YOUR BUILDER / TRADESMEN UNTIL YOUR ITEMS HAVE ARRIVED ON SITE. Unfortunately deliveries can and do go wrong from time to time. We cannot be held responsible for any costs arising from cancelled labour due to late deliveries.
Very large sheet and heavy items (such as 2100mm X 4000mm and above) may be subject to extended lead times (dependant upon location), and will require you to be on site to offload the delivery with the driver.
Please note: Most of the large items we deliver are too big for the 'normal couriers' i.e. Yodel, Parcelforce, DPD etc., this means that in some circumstances the lead times for orders may be extended dependant upon location.
All deliveries made from ourselves, or carriers delivering on our behalf are available to Mainland United Kingdom ONLY. Please contact us if you require deliveries to other areas of the UK. Certain areas of the Highlands of Scotland and Mid Wales also carry a delivery surcharge and/or are subject to extended lead times. ALL deliveries are made Monday - Friday ONLY (we do not offer weekend or bank holiday deliveries). We are unable to give a time for orders to arrive. In general our delivery partners will deliver between the hours of 7:30am - 7:30pm.
On orders for polycarbonate, glazing bars, corrugated sheets and evolution canopies we will contact you after you have placed your order via email to arrange a delivery date. Please provide us with up to date telephone contact details and an up to date email address at the time of your purchase.
Please note: ALL polycarbonate, glazing bars, corrugated PVC sheet, corrugated bitumen sheet and canopies may require a signature upon delivery however, unless specifically requested in writing from the purchaser at the time of order goods may be left in safe place by the delivery company. If you DO NOT want goods to be left without a signature you must inform us at the point of ordering. As most of the deliveries are made by one delivery driver, sometimes with deliveries of larger items you may be required to help the driver with the unloading of the material.
Unfortunately sometimes goods do get damaged in transit. If goods appear to be damaged on delivery please ensure that you sign the paperwork 'DAMAGED' as claims for damaged goods cannot always be accepted if the paperwork has been signed as received "in good condition". Signing 'unchecked' is not an acceptable method of signing the delivery note. Please see our terms and conditions for more information concerning damaged material found here.
IMPORTANT STORAGE INFORMATION
We send most products wrapped in protective packaging to avoid damage during transit. When the delivery has arrived you will need to remove the outer packaging. DO NOT store plastic products in direct sunlight. Products stored in the plastic outer packaging and/or in direct sunlight, particularly in the summer months, can warp making the product unuseable. Products damaged due to improper storage will not be accepted as ‘damaged’.
Should you have a specific request concerning your delivery we will do our best to accommodate you. Please contact us if you require any help or have any specific requests.