Polycarbonate End Closure & Polycarbonate F-Section
Improve the durability of your polycarbonate roofing sheets with the right tools and parts. Polycarbonate F-Section and End Closures create weather-proof seals that prevent water from entering and damaging your roof. Additionally, these enhancements provide draught protection which decreases overall heat loss and prevents condensation caused by precipitation. These End Closures and F-Section for polycarbonate roofing sheets come in different lengths and different levels of thickness.
General Technical Data:
Sheet thickness: 10mm, 16mm, 25mm, 35mm
Length: 2100mm, 2500mm, 3000mm, 4000mm, 5000mm, 6000mm
Colour: White, Brown, Anthracite Grey
Installation:
The installation process differs depending on whether you have a polycarbonate end closure or F-Section for polycarbonate roofing sheets.
End closure: When using polycarbonate roof sheet, end closure can be sealed onto it using a low modulus neutral cure silicone. By applying the silicone along the underside of the end closure's top lip, you can create a watertight seal.
F-Section: You can attach PVC F-Section to polycarbonate sheeting by using a snap down rafter supported glazing bar from Varico. The F-Section is inserted neatly into the bar's base, resulting in a weatherproof seal and finish. Aluminium F-Section should be used as a stand-alone product in place of and end bar.
Delivery Information:
For residents of the UK Mainland, we can send polycarbonate sheet end closures or F-Sections ourselves or by using our selected carrier.
Note that deliveries to certain parts of the Scottish Highlands, or mid-Wales may incur a delivery surcharge and / or extended lead times.
If you need a delivery to a UK area outside of the mainland, such as Shetland, the Isle of Wight, or Orkney, please get in touch with us. You can do so by ringing 01922 455338 or emailing support@varicoltd.com
Why Choose Varico?
We stock polycarbonate sheet end closures in white, brown and anthracite grey as well as F-Sections in white and brown. Keep a close eye on this page for any updates to our product selection.
Customer service is at the forefront of what makes Varico the company this it is. Consequently, we are more than happy to cut polycarbonate sheets purchased from us to the dimensions of your choice.
FAQ's
If you are considering purchasing polycarbonate end closure from us, you may have a few questions to ask. Before contacting us, please check whether the following section has the information that you are seeking.
At what end of a polycarbonate sheet should an end closure be installed?
An end closure should be affixed at the end of the sheets closest to the gutter - in other words, at the sheets lower end. If you structure is open all round such as a pergola roof, end closures should be used on the top and bottom of the panels.
Does an F-Section always have to be installed with a snap down rafter supported glazing bar?
No - you could instead simply install an F-section by itself. Even without the bar, you can still use an F-Section to form a watertight, draughtproof seal to the roofs edges.
How long is an aluminium F-Section likely to last?
We offer F-Sections made of high-quality aluminium, which is renowned for its long lifespan. This material has been known to last for up to 50 years - and often longer.