Home > Easy Fit Polycarbonate Roofing System
(Details shown apply to the default selection)
Availability:
In stock, ready to dispatch
PVCu End Closure For Use With Easy-Fit Clickloc Polycarbonate Roofing System
Polycarbonate end closure is used to finish the bottom end of all easyfit polycarbonate sheets. It is essential when using polycarbonate sheets in a roofing application that end closure is used as it forms a weather proof seal to the ends of the sheets preventing water ingress.
End closure should be used at the lower ends of the roof sheets (nearest to the gutter).
Fitting End Closure To Sheets
End closure should be sealed on to the polycarbonate sheets using a low modulus neutral cure silicone (such as the Olive C22 LMN silicone available from ourselves). Silicone should be applied along the undersides of the top lip of the end closure to form a weather tight seal and prevent unwanted water ingress inside the sheets.
For more installation or technical advice please do not hesitate to contact us.
For technical or sales enquiries please get in touch.